咨询热线

13256798563

当前位置:首页-新闻动态-企业动态-橡胶粉碎机的使用特点介绍

neixin.png

橡胶粉碎机的使用特点介绍

橡胶粉碎机是应用废旧塑料、橡胶制品停止回收造粒的必备设备,它能把各种塑料(编织袋、农膜、手提袋、橡胶、海绵等)制品粉碎成小块,并在粉碎的同时清洗除去其中的尘土,杂质,从而得到洁净清洁的塑料物品,使塑料回收机械可以顺利工作。
Rubber crusher is a necessary equipment for using waste plastics and rubber products to stop recycling and granulating. It can crush all kinds of plastics (knitting bags, agricultural films, handbags, rubber, sponges, etc.) into small pieces and remove dust and impurities while crushing, so as to obtain clean plastic articles, so that the plastic recycling machinery can work smoothly.
原理概述了撞击式粉碎的相关粉碎理论,研讨了常温下橡胶粉碎机对普通塑料原料以及相关塑料回收停止超细粉碎的机理。经过塑料粉碎实验,粉碎机的原理及其实验流程,讨论了转速、入料粒度、加料速度和出料口位置等工艺参数对粉碎效果的影响。依据其构造性能和塑料粉体阐明,分离粉碎机内粉体高频、高速、大应力、高应变速率的碰撞特征,提出此粉碎效果属于脆性断裂的新观念。
The theory of impact crushing is summarized, and the mechanism of rubber crusher stopping ultra-fine crushing of common plastic materials and related plastics at room temperature is discussed. Through the plastic crushing experiment, the principle of the crusher and its experimental process, the effects of the technological parameters such as rotational speed, feed size, feed rate and outlet position on the crushing effect were discussed. According to its structural properties and plastic powder clarification, the collision characteristics of high frequency, high speed, high stress and high strain rate of the powder in the separating mill are presented, and a new concept that the crushing effect belongs to brittle fracture is put forward.
中药超细粉碎机
橡胶粉碎机的维护窍门是这样的:
The maintenance tips of rubber crusher are as follows:
1、橡胶粉碎机机轴承当负机器的全部负荷,所以良好的光滑对轴承寿命有很大的关系,它直接影响到机器的运用寿命和运转率,因此请求注入的光滑油必需清洁,密封必需良好。新装置的轮箍容易发作松动必需经常停止检查。
1. Rubber mill bearings are negative to the full load of the machine, so good smoothness has a great impact on the bearing life, which directly affects the service life and operation rate of the machine. Therefore, the lubricant required to be injected must be clean and the seal must be good. Wheel hoops of new devices are prone to loosening and must be checked regularly.
2、橡胶粉碎机留意机器各部位的工作能否正常。
2. Rubber crusher should pay attention to the normal operation of all parts of the machine.
3、留意检查易磨损件的磨损水平,随时留意改换被磨损的零件。
3. Pay attention to check the wear level of wearable parts, and change the worn parts at any time.
4、放活动安装的底架平面,应进来灰尘等物以免机器遇到不能破碎的物料时活动轴承不能在底架上挪动,致使发作严重事故。
4. Place movable mounting chassis plane, dust and other materials should be brought in to avoid moving bearing on the chassis when the machine encounters materials that can not be broken, resulting in serious accidents.
5、橡胶粉碎机机轴承油温升高,应立刻停车检查缘由加以消弭.
5. When the bearing oil temperature of rubber crusher rises, stop immediately to check the reason and eliminate it.
本文由中药超细粉碎机进行编写,想要了解更多的产品及更详细的精彩内容,请关注我们的官方网站:http://www.jnjuncheng.com
This article is written by the superfine crusher of traditional Chinese medicine. For more products and more details, please pay attention to our official website: http://www.jnjuncheng.com.

济南骏程机械设备有限公司

PHONE

13256798563 / 400-766-9788 

E-mail

junchengweifen@163.com

ADDRESS

济南市市中区袁庄会龙工业园

Website

http://www.jnjuncheng.com

  • 手机客户端
  • 客服微信

首页 / 关于我们 / 产品中心 / 工程案例 / 新闻动态 / 服务和支持 / 联系我们 /

版权所有:济南骏程机械设备有限公司 备案号: 鲁ICP备15034461号-3 技术支持: 济南诺商信息 网站地图 XML TXT 流量统计: