The motion system of the Ultra-micro damage machine of traditional Chinese medicine is one-way high-speed continuous rotation, single belt rolling is selected, and the transmission is stable when high-speed rotation is carried out. It is necessary to open the front cover of the machine after shutdown to clean the inner cavity of the machine to ensure the cleanliness of the machine working face. Damaged materials can be discharged directly from the abdomen of the machine. The thickness of the damage can be accomplished by different aperture sieves. After the machine is in place, it must be placed smoothly and fixed with foot screw. Before commissioning, the inner chamber of the machine should be cleaned and the front cover should be locked with a star handle. After switching on the power supply, attention should be paid to its phase sequence, so that the spindle rotates in the direction shown. During the test run, attention should be paid to whether there is any abnormal noise in the machine so that the train can be checked in time. In the hopper, equipment storage bags.
Medium temperature, low temperature and ultra-low temperature are selected to damage the ultramicro-damage machine of traditional Chinese medicine, which has more advantages for shell, bone and mineral medicines with fine texture, and is suitable for materials with fibrous, high toughness or certain moisture content, so it is widely used.
After micronization, because the dissolution rate of the active ingredients is advancing, the effect of the original prescription can be obtained with less dosage than that of the original prescription. After ultrasonic extraction, the content of Geniposide and berberine in ultrafine powder of Huanglian Jiedu Powder was 26.26% and 37.07% higher than that of fine powder, respectively. According to statistics, according to the different nature and damage degree of medicinal materials, micronization can generally save 30%-70% of medicinal materials. This has important implications for the maintenance of traditional Chinese medicine resources.
The smooth finger in the bearing seat of the Ultra-micro damage machine of traditional Chinese medicine should be replaced regularly. The temperature rise of the bearing seat should not exceed 35 C. The protective cover of electric appliances and belts should not be removed at will. For the safety of users, it is necessary for power supply to be grounded. Damages need to be dried, not processed wet and greasy Chinese medicine. Damaged drugs should not exceed half the capacity of the damaged tank. Generally, the damage of traditional Chinese medicine takes only half a minute, and that of hard medicine takes only one minute. This machine can not be used continuously for a long time, and the starting time should not exceed 5 minutes each time. If the processing quantity is large, the distance should be used to prevent the bearing from overheating and damaging the motor. Do not start the switch when the top cover is turned over. After a long period of use, carbon brushes and blades, such as severe wear and tear, need to be replaced.