超微粉碎机厂家

咨询热线

13256798563

当前位置:首页-新闻动态-行业新闻-如何控制中药低温粉碎机粉碎粒度

neixin.png

如何控制中药低温粉碎机粉碎粒度

  近年来,中药低温粉碎机得到了社会各界的认可和支持,本文就中药低温粉碎机的粒度控制进行分析,希望能与这些朋友一起了解!
  In recent years, the low-temperature crusher of traditional Chinese medicine has been recognized and supported by all walks of life. In this paper, the granularity control of the low-temperature crusher of traditional Chinese medicine is analyzed, hoping to get to know with these friends!
  冷轧机加工粒度控制根据叶轮转速的分级变化和吸风量的调节。改变成品粒度,你好鞋也应该改变。改进叶轮转速分级或减少风量,使成品细粒度增大,从而导致破碎机内流动迟缓,破碎机与分级叶轮电机的电流值增大、减小。反之,叶轮转速越高,分级粒度(即产品粒度)越细,反之,越粗。还可以根据调节通过风机的风量、坡度的变化,来调整成品粒度;通过风机的气流较大,成品尺寸较粗;如果风量小,成品尺寸就好。
中药低温粉碎机
  The granularity control of cold rolling mill is based on the gradation change of impeller speed and the adjustment of air suction. Changing the granularity of finished products, your shoes should also be changed. Improving the impeller speed classification or reducing the air flow, so as to increase the fineness of the finished product, resulting in slow flow in the crusher, and the current value of the crusher and the classified impeller motor increases and decreases. On the contrary, the higher the speed of impeller, the finer the grading granularity (i.e. the product granularity), and vice versa, the coarser the grading granularity. It can also adjust the particle size of finished products according to the change of air volume and gradient of fans; the air flow through fans is larger, and the size of finished products is thicker; if the air volume is small, the size of finished products is better.
  在生产过程中,一定要保证电动机和分级破碎时电流不过载的情况下调整成品的粒度和进给量。碎材料的破碎板到气流衬里和转移之间的封面,然后进入分级室,通过旋转轮,由空气动力的平衡力和离心力的作用分类,从粗分离物质转移覆盖粉碎室的内腔再次粉碎,细材料(成品)分类在叶轮吸入,进入放电室,从排出口进入收集系统。
  In the process of production, it is necessary to ensure that the size and feed of finished products can be adjusted without overloading the current when the motor and the stage break. The crushing plate of crushing material is transferred to the cover between airflow lining and transfer, and then it enters the classification chamber. By rotating wheel, it is classified by the balance force of aerodynamic force and centrifugal force. The crushing material is transferred from the crude separating material to the inner chamber covering the crushing chamber and crushed again. Fine material (finished product) is classified into impeller suction, into discharge chamber, and from discharge outlet to collection system. Unification.
  以上内容由中药低温粉碎机厂家为大家整理,想要了解更多内容,欢迎访问网站:http://www.jnjuncheng.comFor more information, please visit the website: http://www.jnjuncheng.com.
 

济南骏程机械设备有限公司

PHONE

13256798563 / 400-766-9788 

E-mail

junchengweifen@163.com

ADDRESS

济南市市中区袁庄会龙工业园

Website

http://www.jnjuncheng.com

  • 手机客户端
  • 客服微信

首页 / 关于我们 / 产品中心 / 工程案例 / 新闻动态 / 服务和支持 / 联系我们 /

版权所有:济南骏程机械设备有限公司 备案号: 鲁ICP备15034461号-3 技术支持: 济南诺商信息 网站地图 XML TXT 流量统计: