1. Before starting the ultra-fine crusher of traditional Chinese medicine, first rotate the rotor by hand to check whether the grippers, hammers and rotors operate flexibly and reliably, whether there is knocking in the crushing room, whether the rotating direction of the rotor is in line with the direction indicated by the arrow, and whether the lubrication of the power and plastic crusher is outstanding.
2. Always pay attention to the operation of the ultra-fine crusher of traditional Chinese medicine in operation. First, the feed should be uniform to prevent blocking the crushing chamber. Second, do not overload the operation for a long time. If it is found that there are oscillation, noise, high temperature of bearing and body, and spraying material outward, it is necessary to stop the machine immediately to check, and the operation can be continued after troubleshooting.
3. The main devices of the ultra-fine crusher and power unit of Chinese medicine are strong. If the plastic crusher needs to be fixed for a long time, it should be fixed on the cement foundation; if the plastic crusher needs to be mobile, the unit should be installed on the seat made of angle iron, and ensure that the power machine and the belt groove of the plastic crusher are in the same rotary plane.
4. After starting, the ultra-fine crusher of traditional Chinese medicine should keep it idling for 3 minutes, without abnormal phenomena before feeding. And don't change the pulley at will, in order to prevent the breaking room caused by too high speed or too low speed affecting the operation efficiency of the crusher.
5. After the device of Chinese medicine superfine crusher is finished, the fasteners of each part should be checked and tightened if loosening occurs. At the same time, check the belt tightness is appropriate. The method of blocking the ultra-fine crusher of traditional Chinese medicine:
1. The feeding speed is too fast, and the load increases, resulting in blockage. In the process of feeding, we should always pay attention to the large deflection angle of the ammeter pointer. If the current exceeds the rated current, it indicates that the motor is overloaded and overloaded for a long time, it will burn the motor. When this happens, the feeding gate should be reduced or closed immediately, or the feeding method can be changed, and the feeding quantity can be controlled by increasing the feeder. There are two kinds of feeders: manual feeder and automatic feeder. Users should choose the appropriate feeder according to the actual situation. Because of the high speed, high load and strong fluctuation of the load of the crusher. Therefore, the current of the ultra-fine crusher of traditional Chinese medicine is generally controlled at about 85% of the rated current.
2. Imperfect discharge pipeline or blocked feeding too fast will block the pulverizer tuyere; improper matching with transport equipment will cause the air of discharge pipeline to weaken or block up after no air. After finding out the faults, the unmatched conveying equipment should be cleared through the feeding port, and the feeding quantity should be adjusted to make the equipment run normally.
This article is supported by TCM superfine grinder. For more details, please click on our official website http://www.jnjuncheng.com. We will provide you with satisfactory service wholeheartedly.